Figure 6From: A distributed power control and mode selection algorithm for D2D communications2-cell simulation scenarios. In Scenario 1 (left) the D2D pair is randomly dropped in an area that is “on the other side” of the access point than UE1. In Scenario 2, the D2D pair is randomly dropped in an area close to UE1. In both scenarios, UE1 moves from the cell center to the cell edge (Position 1 …Position 10). UE2 is the transmitting UE of the D2D pair. UE3 is a stationary interfering UE at a fixed position in the neighbor cell.Back to article page