Page 24 of 86
The cooperative communications show the great advantage on the relays that can share their resource to improve the decoding of destination. However, relays are considered not reliable due to a low signal stren...
Software-defined networking (SDN) and network function virtualization (NFV) represent significant changes to the architecture of data networks. SDN provides clean separation of the control plane from the data ...
We propose a novel method for constructing beam codebooks, i.e., a set of beamforming weights, to be used for beam sweeping and data transmission in mmWave massive MIMO channels. The proposed beam codebooks ar...
In this paper, using the concept of stochastic geometry, we present an analytical framework to evaluate the signal-to-interference-and-noise-ratio (SINR) coverage in the uplink of millimeter wave cellular netw...
This paper analyzes the effective capacity of delay-constrained machine-type communication (MTC) networks operating in the finite blocklength regime. First, we derive a closed-form mathematical approximation f...
We present an approach to schedule Long Term Evolution (LTE) uplink (UL) Machine-to-Machine (M2M) traffic in a densely deployed heterogeneous network, over the street lights of a big boulevard for smart city a...
This paper investigates the outage probability and rate performance of multi-hop full duplex (FD) and half duplex (HD) decode-and-forward (DF)-based relay networks. First of all, we derive new closed form equa...
Correlation filter-based trackers have recently shown excellent performance in terms of motion blur and illumination changes, but they are notoriously sensitive to deformation. It has been demonstrated that th...
Proactive content caching in small cells (SCs) (i.e., proactive edge caching) can significantly reduce energy consumption of networks. However, the sleep mode of SCs can make the cached contents in SCs unavail...
The performance of a belief propagation decoder for low-density parity-check codes is limited by the presence of trapping sets in the code’s graph. This leads to an error floor at higher signal-to-noise ratios...
In cloud radio access network (Cloud-RAN), most previous research aims to reduce the energy consumption of the total system and ignores specific requirements of energy-saving in mobile users. For the meantime,...
Low-density multiple-input multiple-output code (LDMC) can reduce the complexity of tree-search detection in MIMO systems. In this paper, we present a new modified progressive edge-growth (PEG) algorithm to co...
The geography-based (geo-based) resource selection algorithm is one of the feasibility schemes of third-generation partnership project (3GPP). However, most researches about it ignore the impacts of boundary i...
In view of the problem of resource waste caused by the repeated storage of medical data, our scheme proposes that convergent encryption is applied to the medical cloud, and the hash value of the convergent key...
An un-coded multi-transmitter query scheme is introduced for wireless backscatter communication systems in which M transmitters and N receivers are used for single-tag connectivity (M × 1 × N). The main idea is t...
In this paper, we propose a blind channel estimation algorithm for the amplify-and-forward (AF) two-way relay network (TWRN) which consists of two terminal nodes and one relay node. The orthogonal frequency di...
The weighting method of the traditional fixed combination forecasting model is the only criterion considered to improve accuracy, which has some limitations. In order to improve the comprehensive prediction pe...
The speech enhancement based on the generative adversarial network has achieved excellent results with large quantities of data, but performance in the low-data regime and tasks like unseen data learning still...
Guaranteeing Quality of Service (QoS) for heterogeneous traffic is a major challenge in the Fourth Generation (4G) mobile networks. Therein, the absence of sophisticated resources allocation process at the bas...
This paper outlines a new method of a location service (LCS) in the asynchronous wireless networks (AWNs) where the nodes (base stations) operate asynchronously in relation to one another. This method, called ...
In order to improve the automation and reliability of the mechanized transplanting, a vegetable seedling automatic conveying system was designed. The functional execution component of the system consists of a ...
New algorithms and architectures in the context of 5G shall be explored to ensure the efficiency, robustness, and consistency in variable application environments which concern different issues, such as the sm...
To allow doctors to monitor the physical parameters of the patient’s body in real time and to understand the changes in the patient’s condition in time, the medical remote monitoring system based on the Intern...
Indoor robot localization is an indispensable ingredient for robots to perform autonomous services because GPS (Global Position System) information is not available. Natural features are usually used to implem...
With the hasteful development of ocean economy and the increasing exploiture of ocean resources, offshore water is contaminated seriously. Ocean ecological environment is unprecedentedly faced to threat and de...
One of recent proposals on standardizing quality of user experience (QoE) of video streaming over mobile network is video Mean Opinion Score (vMOS), which can model QoE of video streaming in 5 discrete grades....
In multi-antenna simultaneous wireless information and power transfer (SWIPT) system, beamforming strategy has been widely analyzed due to the increasing signal strength. It can not only increase the signal st...
The inter-user interference is a critical performance degradation factor in a full-duplex multi-user system. However, the conventional pre-processing filters, such as null space projection filter and regulariz...
Positioning educational robots in the indoor ambiance is an important and basic function for robots to provide intelligent educational services for users, and it is still an open challenge problem. This paper ...
The human teeth face a variety of ways to move during orthodontic treatment. The types of orthodontic tooth movements have linked to the moment to force (M/F) ratio. This paper aims to determine the precise M/...
Because of the influence of comprehensive hub construction on network flow, this paper adopts the bi-level programming model (BPM) to solve the problem about the integrated optimization of multi-hub location a...
Dynamic thermal rating (DTR) of transmission lines is related to wind speed, wind direction, ambient temperature, and so on. Among the environmental parameters, there is a difference between the obtained envir...
Large-scale wind turbines have become the trend of the wind power industry. However, the main factors restricting the large scale wind turbines are frequent replacement of carbon brush and slip ring and the ha...
In this paper, an enhanced transmission scheme for cooperative relaying networks with non-orthogonal multiple access (ECRN-NOMA) is proposed. In the proposed scheme, two different kinds of transmission schemes...
This work presents an extension of the high-resolution RiMAX multipath estimation algorithm, enabling the analysis of frequency-dependent propagation parameters for ultra-wideband (UWB) channel modeling. Since...
According to the actual demand of the wireless sensor network for multimedia information acquisition, the new multimedia wireless sensor node is designed and implemented with FPGA as the core and Zigbee wirele...
This paper proposes a new image scrambling algorithm based on the periodic characteristics of the Josephus ring. The algorithm composes the pretreatment part of the entire image encryption system and scrambles...
There are some deficiencies in the Monte Carlo localization algorithm based on rangefinder, which like location probability distribution of the k moment in the prediction phase only related to the localization of...
In cognitive radio (CR) system, secondary user (SU) should use available channels opportunistically when the primary user (PU) does not exist. In CR network, SUs have to detect the PU signal with sufficient se...
Wireless sensor network (WSN) in the Internet of Things consists of a large number of nodes. The proposal of compressive sensing technology provides a novel way for data aggregation in WSN. Based on the cluste...
By studying the development status of cold chain logistics in China, and the current situation in the three specific industries of electronics commerce, supermarkets, and the food and beverage industry, this p...
In wireless sensor networks, the existing data aggregation algorithms usually cannot evaluate the extent of data damage in presence of additive attacks. To resolve such problem, a resilient data aggregation me...
Risk analysis is an important fundamental basis of the decision-making process, and it has been applied in many fields. In order to improve the risk management of logistic, a new model based on particle swarm ...
Schumann resonance oscillation detection is a complex procedure which requires customized and high-quality measurement systems. The primary objective of this work was to design and implement a stand-alone, por...
Non-orthogonal multiple access (NOMA) is a promising method for enhancing the throughput in visible light communication (VLC) networks. In NOMA, signal power domain control, called gain ratio power allocation ...
In view of the fuzziness and randomness of the safety evaluation of the channel navigation environment, a risk evaluation model of the channel navigation is established with the set-valued statistics and the g...
In the energy resource-constrained wireless applications, turbo codes are frequently employed to guarantee reliable data communication. To both reduce the power dissipation of the turbo decoder and the probabi...
Intelligence optimization algorithms have an important application in engineering calculation. Swarm intelligence optimization algorithms belong to the class of intelligent algorithms, which are derived from t...
Network virtualization is a vital technology that helps overcome shortcomings such as network ossification of the current Internet architecture. However, virtual network embedding (VNE) involving the allocatio...
It is controversial that the cost of construction 3D printing is lower than the conventional construction in academic field. The reason is that some scholars have confused attributes between construction 3D pr...
Learn more about the impact the EURASIP Journal on Wireless Communications and Networking has worldwide
2022 Citation Impact
2.6 - 2-year Impact Factor
2.5 - 5-year Impact Factor
1.098 - SNIP (Source Normalized Impact per Paper)
0.985 - SJR (SCImago Journal Rank)
2023 Speed
23 days submission to first editorial decision for all manuscripts (Median)
157 days submission to accept (Median)
2023 Usage
1,226,841 downloads
99 Altmetric mentions
​​​​We offer a free open access support service to make it easier for you to discover and apply for article-processing charge (APC) funding. Learn more here.
